DTC C1AC2-00: Rear Side Radar Sensor (Module "A") Beam Axis Misalignment (Horizontal) [11/2023 - ]: Description
This DTC is stored when the angle of the blind spot monitor sensor RH (A) deviates more than the allowable range from the horizontal axis.
HINT:
- If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor system on, the blind spot monitor sensor may store this DTC by mistake.
- When mud, snow, ice, a sticker, etc. is covering the sensor or its surrounding area on the rear bumper, the blind spot monitor sensor may store this DTC by mistake.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1AC2-00 | Rear Side Radar Sensor (Module "A") Beam Axis Misalignment (Horizontal) | When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is activated | Blind spot monitor sensor RH (A) |