Freeze Frame Data [11/2023 - ]
- FREEZE FRAME DATA
- Whenever DTCs are detected, the blind spot monitor sensor stores the current vehicle (sensor) state as freeze frame data.
- CHECK FREEZE FRAME DATA
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the blind spot monitor system on.
- Turn the GTS on.
- Enter the following menus: Body Electrical / Blind Spot Monitor "B" or Blind Spot Monitor "A" / Trouble Codes.
- According to the display on the GTS, display the freeze frame data for the selected DTC.
Body Electrical > Blind Spot Monitor "B" > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Total Distance Traveled Total distance traveled 0 to 16777215 - - Total Distance Traveled - Unit Total Distance Traveled - Unit km or mile - - Power Supply Voltage Power supply voltage 0 to 49.95 V Ignition switch ON:
11 to 14 V- BSM Outer Mirror Indicator Information (Left) Status of indicator Extinction, Lighting or Blinking - - BSM Outer Mirror Indicator Information (Right) Status of indicator Extinction, Lighting or Blinking - - LED Outer Mirror Indicator Voltage (Currently Value) Voltage value of indicator 0 to 25.5 V - - LED Outer Mirror Indicator Current (Currently Value) Electrical current value of indicator 0 to 255 mA - - Dimmer Signal Status of dimmer signal OFF or ON - - Shift Position R State of the shift position R signal OFF or ON OFF: Shift position other than R
ON: Shift position in R- Vehicle Speed Vehicle speed signal -327.68 to 327.67 km/h Almost same as actual vehicle speed - Steering Angle Steering angle sensor -3072 to 3070.5 deg Left turn: Increases
Right turn: Decreases- Yaw Rate Yaw rate sensor -125 to 124.612 deg/s Turning right: -124.928 to 0 deg/s
Turning left: 0 to 124.684 deg/s- Turn Switch State of the turn signal switch Left, Right or OFF Left: Left turn signal switch on
Right: Right turn signal switch on
OFF: Turn signal switch off- VGRS Relative Angle Steering angle compensation value calculated by VGRS -8.192 to 8.191 rad - Although the item is displayed on the GTS, it is not applicable to this vehicle. BSM Main Switch Operation Count (Data 1) Number of times BSM main switch was operated 0 to 66635 - - BSM Main Switch Operation Count (Data 2) Number of times BSM main switch was operated 0 to 66635 - - RCTA Main Switch Operation Count (Data 1) Number of times RCTA main switch was operated 0 to 66635 - - RCTA Main Switch Operation Count (Data 2) Number of times RCTA main switch was operated 0 to 66635 - - FHL Operation Count Number of times FHL was operated 0 to 255 - Although the item is displayed on the GTS, it is not applicable to this vehicle. L-BSM Mode Operation Count Number of times L-BSM was operated 0 to 66635 - - Outer Mirror Indicator Brightness Setting Operation Count Number of times outer mirror indicator brightness setting was operated 0 to 66635 - - RCTA Buzzer Volume Level Operation Count Number of times RCTA buzzer volume setting was operated 0 to 66635 - - Outer Mirror Indicator Brightness Status of outer mirror indicator brightness setting Dark or Bright Dark: Outer mirror indicator is dimmed
Bright: Outer mirror indicator is not dimmed- LED Outer Mirror Indicator Current (Dimmer OFF, Bright) Electrical current flow to indicator in Bright setting with dimmer OFF 0 to 100 mA - - LED Outer Mirror Indicator Current (Dimmer OFF, Dim) Electrical current flow to indicator in Dim setting with dimmer OFF 0 to 100 mA - - LED Outer Mirror Indicator Current (Dimmer ON, Bright) Electrical current flow to indicator in Bright setting with dimmer ON 0 to 100 mA - - LED Outer Mirror Indicator Current (Dimmer ON, Dim) Electrical current flow to indicator in Dim setting with dimmer ON 0 to 100 mA - - LED Outer Mirror Indicator Blinking Duty Ratio Duty ratio when indicator blinking 0 to 100 % - - L-BSM Mode Status of L-BSM mode setting OFF, Short, Middle or Long - - Beam Axis Revision Angle Compensation angle of beam axis -327.68 to 327.67 deg - - Body Electrical > Blind Spot Monitor "A"
Tester Display Measurement Item Range Normal Condition Diagnostic Note Total Distance Traveled Total distance traveled 0 to 16777215 - - Total Distance Traveled - Unit Total Distance Traveled - Unit km or mile - - Power Supply Voltage Power supply voltage 0 to 49.95 V Ignition switch ON:
11 to 14 V- LED Outer Mirror Indicator Voltage (Currently Value) Voltage value of indicator 0 to 25.5 V - - LED Outer Mirror Indicator Current (Currently Value) Electrical current value of indicator 0 to 255 mA - - Dimmer Signal Status of dimmer signal OFF or ON - - Buzzer Sound Request Alarm status of RCTA buzzer (No. 2 clearance warning buzzer or blind spot monitor buzzer) OFF or ON - - Buzzer Voltage Buzzer voltage AD conversion value 0 to 25.5 V - Although the item is displayed on the GTS, it is not applicable to this vehicle. Shift Position R State of the shift position R signal OFF or ON OFF: Shift position in any other than R
ON: Shift position in R- Vehicle Speed Vehicle speed signal -327.68 to 327.67 km/h Almost same as actual vehicle speed - Steering Angle Steering angle sensor -3072 to 3070.5 deg Left turn: Increases
Right turn: Decreases- Yaw Rate Yaw rate sensor -124.928 to 124.684 deg/s Turning right: -124.928 to 0 deg/s
Turning left: 0 to 124.684 deg/s- Turn Switch State of the turn signal switch Left, Right or OFF Left: Left turn signal switch on
Right: Right turn signal switch on
OFF: Turn signal switch off- VGRS Relative Angle Steering angle compensation value calculated by VGRS -8.192 to 8.191 rad - Although the item is displayed on the GTS, it is not applicable to this vehicle. BSM Main Switch Operation Count (Data 1) Number of times BSM main switch was operated 0 to 66635 - - BSM Main Switch Operation Count (Data 2) Number of times BSM main switch was operated 0 to 66635 - - RCTA Main Switch Operation Count (Data 1) Number of times RCTA main switch was operated 0 to 66635 - - RCTA Main Switch Operation Count (Data 2) Number of times RCTA main switch was operated 0 to 66635 - - Outer Mirror Indicator Brightness Status of outer mirror indicator brightness setting Dark or Bright Dark: Outer mirror indicator is dimmed
Bright: Outer mirror indicator is not dimmed- LED Outer Mirror Indicator Current (Dimmer OFF, Bright) Electrical current flow to indicator in Bright setting with dimmer OFF 0 to 100 mA - - LED Outer Mirror Indicator Current (Dimmer OFF, Dim) Electrical current flow to indicator in Dim setting with dimmer OFF 0 to 100 mA - - LED Outer Mirror Indicator Current (Dimmer ON, Bright) Electrical current flow to indicator in Bright setting with dimmer ON 0 to 100 mA - - LED Outer Mirror Indicator Current (Dimmer ON, Dim) Electrical current flow to indicator in Dim setting with dimmer ON 0 to 100 mA - - LED Outer Mirror Indicator Blinking Duty Ratio Duty ratio when indicator blinking 0 to 100 % - - RCTA Buzzer Volume Status of RCTA buzzer volume Small, Middle or Large - Although the item is displayed on the GTS, it is not applicable to this vehicle. RCTA Buzzer Sound Frequency Status of RCTA buzzer sound frequency 1000 to 2400 Hz - Although the item is displayed on the GTS, it is not applicable to this vehicle. RCTA Buzzer Sound Duty Ratio (Large) Status of RCTA buzzer sound duty ratio 0 to 100 % - Although the item is displayed on the GTS, it is not applicable to this vehicle. RCTA Buzzer Sound Duty Ratio (Middle) Status of RCTA buzzer sound duty ratio 0 to 100 % - Although the item is displayed on the GTS, it is not applicable to this vehicle. RCTA Buzzer Sound Duty Ratio (Small) Status of RCTA buzzer sound duty ratio 0 to 100 % - Although the item is displayed on the GTS, it is not applicable to this vehicle. L-BSM Mode Status of L-BSM mode setting OFF, Short, Middle or Long - - Beam Axis Revision Angle Compensation angle of beam axis -327.68 to 327.67 deg - -
- CLEAR FREEZE FRAME DATA NOTE:
Clearing the DTCs will also clear the freeze frame data.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the blind spot monitor system on.
- Turn the GTS on.
- Clear the DTCs and freeze frame data.