DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 117 (Rear Motor Generator Control System - Diagnostic Codes) >> Rear Motor Generator Control System >> DTC P0BF1-28: Drive Motor "B" Phase U Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF5-28: Drive Motor "B" Phase V Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF9-28: Drive Motor "B" Phase W Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure [12/2019 - 11/2023] >> Procedure

DTC P0BF1-28: Drive Motor "B" Phase U Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF5-28: Drive Motor "B" Phase V Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF9-28: Drive Motor "B" Phase W Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure [12/2019 - 11/2023]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GO TO MOTOR GENERATOR CONTROL SYSTEM 
    1. Go to Motor Generator Control System.

      Refer to DTC P0BF1-28: Drive Motor "B" Phase U Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF5-28: Drive Motor "B" Phase V Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF9-28: Drive Motor "B" Phase W Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure [12/2019 - 11/2023]

      HINT: 

      For the P0BF1-28, P0BF5-28 and P0BF9-28 inspection procedures, refer to the appropriate Motor Generator Control system service information.

      Result

      Result
      NEXT

    Result: 

    NEXT 

    END 

Diesel-Data.com