DTC Summary
WARNING: This page is about a different variant/trim than selected.
- MALFUNCTION DESCRIPTIONÂ
This DTC indicates that the rear motor torque execution value does not correspond to the torque command value sent from the hybrid vehicle control ECU to the rear motor. The cause of this malfunction may be one of the following:
Area Main Malfunction Description Inside of inverter Inverter with converter assembly internal circuit malfunction Rear traction motor with transaxle assembly - Rear motor (MGR) internal malfunction (entry of foreign matter, etc.)
- Open or short circuit in the rear motor coils
Inverter low-voltage circuit The connectors are not connected properly HV floor under wire (rear traction motor cable) - Open circuit or poor insulation on HV floor under wire (rear traction motor cable)
- Defective HV floor under wire (rear traction motor cable) connection
Hybrid vehicle control ECU Hybrid vehicle control ECU internal circuit malfunction