DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Cruise Control System - Service Information >> Millimeter Wave Radar Sensor >> Removal [12/2019 - 09/2020] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR HV MODEL)

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Millimeter wave radar sensor assembly Adjust millimeter wave radar sensor assembly
  • Dynamic Radar Cruise Control System
  • Lane Control System
  • Road Sign Assist System
  • Front Radar Sensor System
  • Pre-collision System
  • Lighting System (EXT)
 Refer to ADJUSTMENT [12/2019 - 09/2020] 
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED (FOR GASOLINE MODEL)

Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Millimeter wave radar sensor assembly Adjust millimeter wave radar sensor assembly
  • Dynamic Radar Cruise Control System
  • Lane Control System
  • Road Sign Assist System
  • Front Radar Sensor System
  • Pre-collision System
  • Lighting System (EXT)
 Refer to ADJUSTMENT [12/2019 - 09/2020] 
Diesel-Data.com