DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (Motor Generator Control System (AWD) - Diagnostic Codes (3 Of 5)) >> MOTOR GENERATOR CONTROL SYSTEM (for AWD) >> DTC P0BF1-28: Drive Motor "B" Phase U Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF5-28: Drive Motor "B" Phase V Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC P0BF9-28: Drive Motor "B" Phase W Current Sensor Signal Bias Level Out of Range / Zero Adjustment Failure [12/2019 - 11/2023] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different variant/trim than selected.
Related DTCs P0BF2 (INF P0BF1-28): Offset malfunction
P0BF6 (INF P0BF5-28): Offset malfunction
P0BFA (INF P0BF9-28): Offset malfunction
Required sensors/components Rear motor inverter Phase U Current Sensor
Rear motor inverter Phase V Current Sensor
Rear motor inverter Phase W Current Sensor
Frequency of operation Continuous
Duration TMC's intellectual property
MIL operation 1 driving cycle
Sequence of operation None
Diesel-Data.com