DTC P0335-00: Crankshaft Position Sensor "A"; DTC P0335-31: Crankshaft Position Sensor "A" No Signal [12/2019 - 11/2023]: Description
WARNING: This page is about a different variant/trim than selected.
If the crankshaft position signal pulse sent from the ECM via a direct line is abnormal, the motor generator control ECU (MG ECU) (built into the inverter with converter assembly) stores DTC P0335-00 or P0335-31.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P0335-00 | Crankshaft Position Sensor "A" | NE signal (crankshaft position sensor) is not input for 2 sec. or more while the engine is running* (1 trip detection logic) |
|
Does not come on | Master Warning: Comes on |
| P0335-31 | Crankshaft Position Sensor "A" No Signal | NE signal (crankshaft position sensor) is not input for 2 sec. or more while the engine is running* (1 trip detection logic) |
|
Does not come on | Master Warning: Comes on |
HINT:
*: When this DTC is stored, vibration may occur when the engine is stopped.
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P0335-00 P0335-31 |
|