DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 67 (Hybrid Control System (AWD) - Diagnostic Codes (1 Of 6)) >> HYBRID CONTROL SYSTEM (for AWD) >> DTC P0A30-2A: Drive Motor "B" Temperature Sensor Signal Stuck In Range [12/2019 - 11/2023] >> DTC Summary

DTC Summary

WARNING: This page is about a different variant/trim than selected.
  1. MALFUNCTION DESCRIPTION 

    This DTC is stored when the rear motor temperature sensor output is abnormal.

    The cause of this DTC output may be the following:

    Rear motor temperature sensor malfunction 

    • Rear motor temperature sensor internal malfunction

    Wire harness malfunction between the rear motor temperature sensor and hybrid vehicle control ECU 

    • The connectors are not connected properly
    • Foreign matter or water on the connector terminals

    HINT: 

    When this DTC is stored, the rear motor temperature sensor is malfunctioning and the self-protection function may not operate. Therefore under certain high load driving condition, the temperature of the rear motor becomes high. If the self-protection function does not operate, the rear motor may malfunction and cause the vehicle to enter fail-safe mode.