DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Electrical >> Gauges >> HEADUP Display System - Diagnostics - Introduction >> HEADUP Display System >> Customize Parameters [12/2019 - ] >> Customize Parameters [12/2019 - ]

Customize Parameters [12/2019 - ]

  1. CUSTOMIZE HEADUP DISPLAY SYSTEM 
    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.

    HINT: 

    The following items can be customized.

    1. Customizing with the GTS
      1. Connect the GTS to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the GTS on.
      4. Enter the following menus: Customize Setting / Display.
      5. Select the setting by referring to the table below.

        Display 

        Tester Display Description Default Setting ECU
        Projection Adjustment (Tilt) Headup display image calibration
        (Tilt calibration)        		 Default $03:Clockwise (+3), $02:Clockwise (+2), $01:Clockwise (+1), $00:Default, $FF:Anti-Clockwise (-1), $FE:Anti-Clockwise (-2), $FD:Anti-Clockwise (-3) Meter mirror sub-assembly
        Projection Adjustment (Keystone) Headup display image calibration
        (Keystone calibration)        		 Default $03:Narrow Top (+3), $02:Narrow Top (+2), $01:Narrow Top (+1), $00:Default, $FF:Narrow Bottom (-1), $FE:Narrow Bottom (-2), $FD:Narrow Bottom (-3) Meter mirror sub-assembly
        Projection Adjustment (Distortion) Headup display image calibration
        (Distortion calibration)        		 Default $03:Convex (+3), $02:Convex (+2), $01:Convex (+1), $00:Default, $FF:Concave (-1), $FE:Concave (-2), $FD:Concave (-3) Meter mirror sub-assembly
        Master Caution Display Function Master warning display setting for headup display ON $00:OFF, $01:ON Meter mirror sub-assembly
        Traffic Sign Recognition Animation Function Traffic sign recognition display setting for headup display ON $00:OFF, $01:ON Meter mirror sub-assembly
        Memory Call Link Function Memory call link setting for headup display image position ON $00:OFF, $01:ON Meter mirror sub-assembly
        Seat Switch Link Function Power seat switch link setting for headup display image position ON $00:OFF, $01:ON Meter mirror sub-assembly
        ECO Drive Indicator Zone Display Function ECO driving indicator function setting for headup display ON $00:OFF, $01:ON Meter mirror sub-assembly

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

    2. Customizing with the multi-information display
      1. Turn the ignition switch to ON.
      2. Select the settings tab on the multi-information display.
      3. Select the setting by referring to the table below.
        NOTE:

        As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.

        HINT: 

        Depending on the specifications of the vehicle, some items may not be displayed.

        "HUD MAIN"

        Display Description Setting ECU
        - Headup display system setting ON/OFF Meter mirror sub-assembly
        "HUD Brightness/Position" Brightness and position setting for headup display -
        "HUD Driving Support" "Tachometer Settings" Display setting for headup display "Blank/Hybrid System/Eco Indicator/Tachometer"
        "Navigation" Display setting for headup display ON/OFF
        "Driving Assist" Display setting for headup display ON/OFF
        "Compass" Display setting for headup display ON/OFF
        "Audio" Display setting for headup display ON/OFF
        "HUD Rotation" Headup display image calibration (rotation calibration) -
Diesel-Data.com