DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Telematics System - Diagnostics - Introduction >> Telematics System >> Problem Symptoms Table [10/2022 - ] >> Problem Symptoms Table [10/2022 - ]

Problem Symptoms Table [10/2022 - ]

HINT: 

APPLICATION FUNCTION

Symptom Suspected Area Link
Vehicle status cannot be checked using the application. Proceed to "Remote Service Malfunction" Refer to Remote Service Malfunction [10/2022 - ]
Vehicle status alerts are not received by the application even if remote notification operation conditions are met. Proceed to "Remote Service Malfunction" Refer to Remote Service Malfunction [10/2022 - ]
Vehicle cannot be operated remotely using the application. Perform remote door lock and unlock registration and check if the problem symptom recurs (for HV Model) Refer to REGISTRATION [10/2021 - 11/2023] , or refer to REGISTRATION [11/2023 - ]
Perform remote door lock and unlock registration and check if the problem symptom recurs (for Gasoline Model) Refer to REGISTRATION [10/2022 - 11/2023] , or refer to REGISTRATION [11/2023 - ]
Proceed to "Remote Service Malfunction" Refer to Remote Service Malfunction [10/2022 - ]
REMOTE ENGINE START AND STOP FUNCTION (USING ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY)

Symptom Suspected Area Link
Engine*1 or hybrid system*2 does not start by remote engine start function. Proceed to "Remote Engine Starter does not Operate" Refer to Remote Engine Starter does not Operate [10/2021 - ]
Engine*1 or hybrid system*2 does not stop by remote engine stop function. Proceed to "Remote Engine Starter does not Operate" Refer to Remote Engine Starter does not Operate [10/2021 - ]
  1. *1: for Gasoline Model

    *2: for HV Model

WARNING NOTIFICATION FUNCTION

Symptom Suspected Area Link
The multi-display screen does not show a warning message even though a warning light turns on or the multi-information display indicates a warning. Proceed to "Warning Notification Function Malfunction" Refer to Warning Notification Function Malfunction [10/2022 - ]
The multi-display screen shows a warning message even though no warning lights are on and the multi-information display does not indicate a warning. Proceed to "Warning Notification Function Malfunction" Refer to Warning Notification Function Malfunction [10/2022 - ]
The multi-display screen shows a warning message different from the warning light or the multi-information display. Proceed to "Warning Notification Function Malfunction" Refer to Warning Notification Function Malfunction [10/2022 - ]
DESTINATION FUNCTION

Symptom Suspected Area Link
Cannot contact call center when Call Dest. Assist is selected on Destination Assist Connect screen Contact Telematics Service Provider to inquire about network status -
Proceed to "UNABLE TO CONNECT TO CALL CENTER" Refer to UNABLE TO CONNECT TO CALL CENTER [12/2019 - ]
Proceed to "DCM Data Signal Circuit between Radio Receiver and DCM" Refer to DCM Data Signal Circuit between Radio Receiver and DCM [10/2022 - ]
Radio and display receiver assembly Refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]
DCM (telematics transceiver) Refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]
Other caller's voice volume cannot be adjusted using the Destination Assist Connect screen Radio and display receiver assembly Refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]
COMMUNICATION BASED VOICE RECOGNITION FUNCTION

Symptom Suspected Area Link
Does not recognize voice commands performed to contact support center Check if the connected service is available -
Check if the normal voice recognition function is operating correctly Refer to PROBLEM SYMPTOMS TABLE [10/2022 - 11/2024] , or refer to PROBLEM SYMPTOMS TABLE [11/2024 - ]
Proceed to "Does not Recognize Voice Commands Performed to Contact Support Center" Refer to Does not Recognize Voice Commands Performed to Contact Support Center [10/2022 - ]
The microphone button on the keyboard input screen does not become enabled Check if the connected service is available -
Proceed to "UNABLE TO CONNECT TO CALL CENTER" Refer to UNABLE TO CONNECT TO CALL CENTER [12/2019 - ]