DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Front Camera System - Diagnostics - Introduction >> Front Camera System >> DTC Check / Clear [12/2019 - ] >> DTC Check / Clear [12/2019 - ]

DTC Check / Clear [12/2019 - ]

  1. CHECK FOR DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes.

      Chassis > Front Recognition Camera > Trouble Codes 

    5. Check for DTCs (Test Failed / Pending / Confirmed).

      HINT: 

      GTS Display Description
      Test Failed Shows the malfunction judgment results during the current trip.
      Pending Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
      Confirmed Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)

      Freeze frame data is stored respectively for pending DTCs, confirmed DTCs and the latest DTCs.

  2. CLEAR DTC 
    1. Connect the GTS to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the GTS on.
    4. Enter the following menus: Chassis / Front Recognition Camera / Clear DTCs.

      Chassis > Front Recognition Camera > Clear DTCs 

    5. Clear the DTCs.

      HINT: 

      Clearing the DTCs will also clear the freeze frame data.

Diesel-Data.com