DTC U0233-87: Lost Communication with Side Obstacle Detection Control Module "B" Missing Message [11/2023 - ]: Procedure

1. Reconnect the cable to the negative (-) auxiliary battery terminal.
2. Turn the ignition switch off.
3. Turn the ignition switch to ON.
4. Check for DTCs.

   Body Electrical > Blind Spot Monitor "A" > Trouble Codes 

   Result

   Result	Proceed to
   DTC U0233-87 is output	A
   No DTCs are output	B

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ] 

Result: 

A 

See step  2

HINT: 

Refer to REMOVAL [11/2023 - ]

Result

Result: 

NEXT 

See step  3

1. Clear the DTCs.

   Body Electrical > Blind Spot Monitor "A" > Clear DTCs 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Check for DTCs.

   Body Electrical > Blind Spot Monitor "A" > Trouble Codes 

   Result

   Result	Proceed to
   DTC U0233-87 is output	A
   No DTCs are output	B

Result: 

A 

REPLACE BLIND SPOT MONITOR SENSOR RH (A). Refer to  REMOVAL [11/2023 - ] 

Result: 

B 

END (BLIND SPOT MONITOR SENSOR LH (B) WAS DEFECTIVE)