DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Axle And Differential - Service Information (2 Of 2) >> Differential Mount Cushion >> Removal [12/2019 - 10/2022] >> Procedure

Removal [12/2019 - 10/2022]: Procedure

  1. REMOVE SPARE TIRE 
  2. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY (for Dynamic Torque Control AWD) 

    Refer to REMOVAL [12/2019 - 10/2022] 

  3. REMOVE TORQUE VECTORING DIFFERENTIAL CARRIER ASSEMBLY (for Dynamic Torque Vectoring AWD) 

    Refer to REMOVAL [12/2019 - 10/2022] 

  4. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION 
    1. Using SST, remove the rear No. 1 differential mount cushion.
      • SST: 09570-48010 
      GTY869946Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Front of the Vehicle - -
      NOTE:
      • Before using SST, apply grease to the SST bolts.
      • Be sure to use the correct combination of SST.
      • Be sure to use the correct direction of SST.
      • Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.
      • Do not tilt the bolts of SST.
      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.
Diesel-Data.com