Removal [11/2023 - ]: Procedure
- REMOVE REAR COMBINATION LIGHT COVER
- REMOVE REAR COMBINATION LIGHT SUB-ASSEMBLY
- Apply protective tape around the rear combination light sub-assembly as shown in the illustration.

Protective Tape - Remove the 2 screws.
- Pull the rear combination light sub-assembly toward the rear of the vehicle as shown in the illustration to disengage the pin and 3 guides and separate the rear combination light sub-assembly.
*a Pin *b Guide 
Remove in this Direction NOTE:To prevent the rear combination light sub-assembly from falling when disengaging the pin and 3 guides, make sure to hold the rear combination light sub-assembly.
- Disengage the 2 guides.
- Disconnect 3 connectors to remove the rear combination light sub-assembly.
- Apply protective tape around the rear combination light sub-assembly as shown in the illustration.
- REMOVE REAR BUMPER ASSEMBLY
Refer to REMOVAL [11/2023 - ]
- REMOVE REAR BUMPER UPPER RETAINER
Refer to PROCEDURE - Step 22
- REMOVE REAR COMBINATION LIGHT CORD







