DTC B167A: Front Door Pressure Sensor LH; DTC B167E: Front Door Pressure Sensor Threshold Malfunction (LH) [12/2019 - 11/2023]: Procedure

1. Turn the ignition switch off.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *1	Side Airbag Sensor Assembly RH
   *2	Rear Airbag Sensor LH

2. Disconnect the cable from the negative (-) auxiliary battery terminal.
   WARNING:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

3. Interchange the side airbag sensor assembly LH with RH and connect the connectors.
4. Connect the cable to the negative (-) auxiliary battery terminal.
5. Turn the ignition switch to ON, and wait for at least 60 seconds.
6. Clear the DTCs stored in memory.

   Body Electrical > SRS Airbag > Clear DTCs 

7. Turn the ignition switch off.
8. Turn the ignition switch to ON, and wait for at least 60 seconds.
9. Check for DTCs.

   Body Electrical > SRS Airbag > Trouble Codes 

   HINT: 

   Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.

   Result

   Result	Proceed to
   DTC B167A or B167E is output.	A
   DTC B166C or B166F is output.	B
   DTCs B166C, B166F, B167A and B167E are not output.	C

10. Turn the ignition switch off.
11. Disconnect the cable from the negative (-) auxiliary battery terminal.
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

12. Return the side airbag sensor assembly LH and RH to their original positions and connect the connectors.

Result: 

A 

REPLACE AIRBAG SENSOR ASSEMBLY. Refer to  REMOVAL [12/2019 - 10/2022]  , or refer to  REMOVAL [10/2022 - 11/2023] 

Result: 

B 

REPLACE SIDE AIRBAG SENSOR ASSEMBLY LH. Refer to  REMOVAL [12/2019 - 10/2022]  , or refer to  REMOVAL [10/2022 - 11/2023] 

Result: 

C 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ]