DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Hybrid Battery Control System - Service Information (2 Of 2)) >> Accelerator Pedal Sensor >> On-Vehicle Inspection [12/2019 - ] >> Procedure

On-Vehicle Inspection [12/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT ACCELERATOR PEDAL (W/SENSOR) ROD ASSEMBLY 
    1. Read the values displayed on the GTS.

      Powertrain > Hybrid Control > Data List 

      Tester Display
      Accelerator Position Sensor No. 1 Voltage %
      Accelerator Position Sensor No. 2 Voltage %

      Result

      Tester Display Accelerator Pedal Condition Specified Condition
      Accelerator Position Sensor No. 1 Voltage % Not depressed 10 to 22%
      Fully depressed 52 to 90%
      Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively
      Accelerator Position Sensor No. 2 Voltage % Not depressed 24 to 40%
      Fully depressed 68 to 99%
      Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively

      If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.

Diesel-Data.com