Operation not Accepted Even If Air Conditioning Switch is Operated [11/2023 - ]: Procedure

1. Clear the DTC.

   Body Electrical > Air Conditioner > Clear DTCs 

2. Check for DTCs.

   Body Electrical > Air Conditioner > Trouble Codes 

   Result

   Result	Proceed to
   B14B2-87 is not output	A
   B14B2-87 is output	B

Result: 

B 

GO TO DTC B14B2-87. Refer to  DTC B14B2-87: Lost Communication with Front Panel LIN Missing Message [11/2023 - ] 

Result: 

A 

See step  2

1. Disconnect the H62 air conditioning amplifier assembly connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Front view of wire harness connector (to Air Conditioning Amplifier Assembly)

2. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   H62-17 (GND) - Body ground	Always	Below 1 Ω

3. Measure the voltage according to the value(s) in the table below.

   Standard Voltage

   Tester Connection	Condition	Specified Condition
   H62-5 (B) - Body ground	Ignition switch off	11 to 14 V
   H62-6 (IG+) - Body ground	Ignition switch ON	11 to 14 V
   	Ignition switch off	Below 1 V

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY. Refer to  REMOVAL [11/2023 - ] 

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR