DTC Check / Clear [12/2019 - ]

CHECK DTC AND FREEZE FRAME DATA (USING GTS)

Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / Brake/EPB / Trouble Codes.
Chassis > Brake/EPB > Trouble Codes

Check for DTCs.

Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 11/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]

NOTE:

The electric parking brake system outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the electric parking brake system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

System	Proceed to
Electronically Controlled Brake System (for Gasoline Model)	Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2019 - 10/2022] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]

Check the freeze frame data.
1. If DTCs are output, check the freeze frame data and read the vehicle status when the DTC was stored.
  HINT:
  
  For Freeze Frame Data: Refer to FREEZE FRAME DATA [12/2019 - 11/2023] , or refer to FREEZE FRAME DATA [11/2023 - ]

CLEAR DTC AND FREEZE FRAME DATA (USING GTS)
1. Turn the ignition switch off.
2. Connect the GTS to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the GTS on.
5. Enter the following menus: Chassis / Brake/EPB / Trouble Codes.
6. Clear the DTCs.
  Chassis > Brake/EPB > Clear DTCs
  
  HINT:
  
  When DTCs are cleared, the freeze frame data will also be cleared.