DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Electric Parking Brake System (Except HV) - Diagnostic Codes & Symptom Tests >> ELECTRIC PARKING BRAKE SYSTEM (for Gasoline Model) >> DTC C0613-2A: Right Electric Parking Brake Actuator Signal Stuck In Range [12/2019 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Although DTC C0613-2A may be stored after entering pad replacement mode, this is not a malfunction.
  • Although DTC C0613-2A may be stored after forcibly releasing the parking brake, this is not a malfunction.
  • The electric parking brake may still operate up to 20 seconds after the ignition switch is turned off. Before disconnecting connectors or fuses, turn the ignition switch off and wait 20 seconds or more.
  • After replacing the skid control ECU (brake actuator assembly), perform yaw rate and acceleration sensor zero point calibration and store system information memorization.

    Refer to UTILITY [12/2019 - 11/2023] , or refer to UTILITY [11/2023 - ]

  • When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light (red) blinks when the ignition switch is first turned ON.
Diesel-Data.com