Utility [09/2020 - ]

HINT: 

Front Beam Axis Adjustment is used to calibrate the beam axis of millimeter wave radar sensor assembly.

1. Perform Front Beam Axis Adjustment according to the display on the GTS.

   For Type A:

   Body Electrical > Front Radar Sensor > Utility 

   Tester Display
   Front Beam Axis Adjustment

   For Type B:

   Body Electrical > Front Radar Sensor > Utility 

   Tester Display
   Front Beam Axis Adjustment

HINT: 

Front Beam Axis Misalignment Reading is used to check the amount of misalignment of the millimeter wave radar sensor assembly.

1. Perform Front Beam Axis Misalignment Reading according to the display on the GTS.

   Body Electrical > Front Radar Sensor > Utility 

   Tester Display
   Front Beam Axis Misalignment Reading

HINT: 

Front Radar Acceleration Sensor Calibration is used to perform calibration of the acceleration sensor in the millimeter wave radar sensor assembly.

1. Perform Front Radar Acceleration Sensor Calibration according to the display on the GTS.

   Body Electrical > Front Radar Sensor > Utility 

   Tester Display
   Front Radar Acceleration Sensor Calibration

1. Following the instructions on the GTS, perform "Transition to Online Axis Alignment Mode".

   For Type A:

   Body Electrical > Front Radar Sensor > Utility 

   Tester Display
   Transition to Online Axis Alignment Mode

   For Type B:

   Body Electrical > Front Radar Sensor > Utility 

   Tester Display
   Transition to Online Axis Alignment Mode