| U0100-87 |
Lost Communication with ECM/PCM "A" Missing Message |
- When both of the following continue for 2 seconds or more:
- The voltage of the IG1 terminal is 10 V or more.
- At a vehicle speed of 60 km/h (38 mph) or more, communication with the ECM cannot be performed.
|
- CAN communication system
- 4WD ECU assembly
- ECM
|
Displayed |
Yes |
| U0125-87 |
Lost Communication with Multi-axis Acceleration Sensor Module Missing Message |
- When both of the following continue for 1 second or more:
- The voltage of the IG1 terminal is 10 V or more.
- At a vehicle speed of 60 km/h (38 mph) or more, communication with the yaw rate and acceleration sensor (airbag sensor assembly) cannot be performed.
|
- CAN communication system
- 4WD ECU assembly
- Yaw rate and acceleration sensor (airbag sensor assembly)
|
Displayed |
Yes |
| U0126-87 |
Lost Communication with Steering Angle Sensor Module Missing Message |
- When both of the following continue for 1 second or more:
- The voltage of the IG1 terminal is 10 V or more.
- Communication with the skid control ECU (brake actuator assembly) cannot be performed.
|
- CAN communication system
- 4WD ECU assembly
- Steering sensor
|
Displayed |
Yes |
| U0129-87 |
Lost Communication with Brake System Control Module Missing Message |
- When both of the following continue for 3 seconds or more:
- The voltage of the IG1 terminal is 10 V or more.
- Communication with the skid control ECU (brake actuator assembly) cannot be performed.
|
- CAN communication system
- 4WD ECU assembly
- Skid control ECU (Brake actuator assembly)
|
Displayed |
Yes |
| U0131-87 |
Lost Communication With Power Steering Control Module Missing Message |
- When the following continues for 1 second or more:
- The voltage of the IG1 terminal is 10 V or more.
- Communication with the power steering ECU (rack and pinion power steering gear assembly) cannot be performed.
|
- CAN communication system
- 4WD ECU assembly
- Power steering ECU (Rack and pinion power steering gear assembly)
|
Displayed |
Yes |