DTC P2756-7F: Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck Off [12/2019 - 10/2022]: Description

The ECM controls the solenoid (SLU) valve using a predetermined current, and performs lock-up and flex lock-up control.

The ECM compares the engagement condition of the lock-up clutch with the lock-up schedule in the ECM memory to detect mechanical malfunctions of the solenoid (SLU) valve, transmission valve body assembly and torque converter assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	Spool Valve	*2	Sleeve
*3	Solenoid Coil	-	-
*a	Current	*b	Hydraulic Pressure

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P2756-7F	Torque Converter Clutch Pressure Control Solenoid Control Actuator Stuck Off	All of the following conditions are met (2-trip detection logic): Engine coolant temperature is 40°C (104°F) or higher. ATF temperature is -10°C (14°F) or higher. The vehicle is being driven with the shift lever in D. No malfunctions are detected in the solenoid (SL1, SL2, SL3, SL4, SL5, SL6, SL, SLU and SLT) valves, transmission revolution sensors (NT and NC), coolant temperature sensor, oil temperature sensor, knock sensor, crankshaft position sensor circuits, electronic throttle or CAN communication system. Any of the following conditions are met: When the ECM sends a lock-up OFF request, the difference between the input turbine speed (NT) and the engine speed (NE) is less than 35 rpm for 1.8 seconds or more. When the ECM sends a lock-up ON request, the difference between the input turbine speed (NT) and the engine speed (NE) is 170 rpm or more for 3.5 seconds or more.	Solenoid (SLU) valve Transmission valve body assembly Torque converter assembly Automatic transaxle assembly	Comes on	DTC stored	SAE Code: P2757

DTC DETECTION CONDITION PATTERNS:

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnostic Condition	Engine coolant temperature is 40°C (104°F) or higher.	◦	◦
	ATF temperature is -10°C (14°F) or higher.	◦	◦
	The vehicle is being driven with the shift lever in D.	◦	◦
	No malfunctions are detected in the solenoid (SL1, SL2, SL3, SL4, SL5, SL6, SL, SLU and SLT) valves, transmission revolution sensors (NT and NC), coolant temperature sensor, oil temperature sensor, knock sensor, crankshaft position sensor circuits, electronic throttle or CAN communication system.	◦	◦
Malfunction Condition	When the ECM sends a lock-up OFF request, the difference between the input turbine speed (NT) and the engine speed (NE) is less than 35 rpm.	◦	-
Malfunction Condition	When the ECM sends a lock-up ON request, the difference between the input turbine speed (NT) and the engine speed (NE) is 170 rpm or more.	-	◦
Duration		1.8 seconds or more	3.5 seconds or more
Detection Logic		2-trip detection logic	2-trip detection logic

HINT:

This DTC is stored when either of the above detection patterns is met.