Typical Enabling Conditions
ALL
| The monitor will run whenever the following DTCs are not stored | P0117, P0118: ECT (Engine coolant temperature) sensor circuit P0112, P0113: IAT (Intake air temperature) sensor circuit |
| Battery voltage | 8 V or more |
| Ignition switch | ON |
| Starter | OFF |
| ECT sensor circuit fail (P0117, P0118) (Pending / MIL) |
Not detected |
| IAT sensor circuit fail (P0112, P0113) (Pending / MIL) |
Not detected |
Either of the following conditions is met: Condition (A) or (B)
CONDITION (A)
| Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start | -29.375°C (-20.875°F) or less |
| Time after engine start | 426.6 seconds or more |
CONDITION (B)
| Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start | Higher than -29.375°C (-20.875°F) |
| Time after engine start | 10 seconds or more |