DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 130 (Automatic Transmission System (UA80E) - Diagnostic Codes (2 Of 2) & Circuit Tests) >> Automatic Transaxle System >> DTC P2713-7F: Pressure Control Solenoid "D" Actuator Stuck Off [12/2019 - 10/2022] >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

The ECM calculates the amount of heat absorbed by the clutch discs and brake discs based on the difference in speed (clutch slippage) between the turbine (input) and output shaft. If the amount of heat absorption exceeds the specified value, the ECM will illuminate the MIL and store this DTC.

If the solenoid (SLT) valve is stuck ON, the line pressure and clutch engagement force will decrease.

NOTE:

If driving continues under these conditions, the clutches will burn out and the vehicle will no longer be drivable.

Diesel-Data.com