DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 130 (Automatic Transmission System (UA80E) - Diagnostic Codes (2 Of 2) & Circuit Tests) >> Automatic Transaxle System >> DTC P2816-7F: Pressure Control Solenoid "H" Actuator Stuck Off [12/2019 - 10/2022] >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

The ECM commands gear shifts by turning the solenoid valves on and off. According to the input shaft revolution (speed) and output shaft revolution (speed), the ECM detects the actual gear (1st, 2nd, 3rd, 4th, 5th, 6th, 7th or 8th gear). When the gear commanded by the ECM and the actual gear are not the same, the ECM illuminates the MIL and stores a DTC.

Diesel-Data.com