Problem Symptoms Table [12/2019 - 10/2021]
NOTE:
- Before performing troubleshooting, change the grille shutter control mode to maintenance mode.
Refer to INITIALIZATION [12/2019 - 10/2021]
- If the swing grille actuator assembly has been replaced with a new one, perform initialization and change the grille shutter control mode.
Refer to INITIALIZATION [12/2019 - 10/2021]
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | Link |
|---|---|---|
| Grille shutter does not operate | Proceed to "Grille Shutter does not Operate" | Refer to Grille Shutter does not Operate [12/2019 - 10/2021] |
| Abnormal noise occurs during grille shutter operation | Check for ice, etc. around the shutters and links | - |
| Swing grille actuator assembly | Refer to DISASSEMBLY [12/2019 - 10/2021] | |
| Radiator shutter sub-assembly | Refer to REMOVAL [12/2019 - 09/2020] , or refer to REMOVAL [09/2020 - 10/2021] |