Customize Parameters [12/2019 - 11/2023]
- CUSTOMIZE PANORAMIC MOON ROOF SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make notes of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the GTS
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Customize Setting / Slide Roof.
- Select the setting by referring to the table below.
Slide Roof
Tester Display Description Default Setting ECU Front SW Auto Operation This function is used to enable or disable auto operation function. ON 0:OFF, 1:ON Sliding roof ECU (Sliding roof drive gear assembly) - Enter the following menus: Customize Setting / Security.
- Select the setting by referring to the table below.
Security
Tester Display Description Default Setting ECU Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)