DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sliding Roof System - Diagnostic Codes & Symptom Tests >> Sliding Roof System >> Remote Control System does not Operate [12/2019 - ] >> Procedure

Remote Control System does not Operate [12/2019 - ]: Procedure

  1. CHECK REMOTE CONTROL FUNCTION 
    1. Check the key-linked and wireless transmitter-linked functions.

      Refer to OPERATION CHECK [12/2019 - ]

      Result

      Result Proceed to
      Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked functions. A
      The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all of the power windows operate. B
      Both the power windows and sliding roof do not operate by the key-linked or wireless transmitter-linked function. C

    Result: 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - ] 

    Result: 

    GO TO POWER WINDOW CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 11/2023]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ] 

    Result: 

    See step  2

  2. CHECK SLIDING ROOF OPERATION 
    1. Check the sliding roof operation.

      Refer to OPERATION CHECK [12/2019 - ]

      OK

      Sliding roof operates normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control Switch). Refer to  Sliding Roof does not Move by Operating Sliding Roof Control Switch [12/2019 - 11/2023]  , or refer to  Sliding Roof does not Move by Operating Sliding Roof Control Switch [11/2023 - ]  

    Result: 

    OK 

    See step  3

  3. REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) (SLIDING ROOF DRIVE GEAR ASSEMBLY) 
    1. Replace the sliding roof ECU (sliding roof drive gear assembly).

      Refer to REMOVAL [12/2019 - 10/2022] , or refer to REMOVAL [10/2022 - 11/2023] , or refer to REMOVAL [11/2023 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  4

  4. INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) 
    1. Initialize the sliding roof ECU (sliding roof drive gear assembly).

      Refer to INITIALIZATION [12/2019 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  5

  5. CHECK REMOTE CONTROL FUNCTION 
    1. Check the key-linked and wireless transmitter-linked functions.

      Refer to OPERATION CHECK [12/2019 - ]

      OK

      The key-linked and wireless transmitter-linked functions operate normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE) 

    Result: 

    NG 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL [12/2019 - 10/2022]  , or refer to  REMOVAL [10/2022 - 11/2023]  , or refer to  REMOVAL [11/2023 - ]