DCM Activation [12/2019 - ]

HINT: 

If the DCM (telematics transceiver) has been replaced, it is necessary to perform the Register Vehicle Information procedure.

1. Connect the GTS to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the GTS on.
4. Choose "Telematics" from the System Selection Menu, and then click "Utility".
5. Click "VIN Synchronization" on the Utility Selection Menu.

   Body Electrical > Telematics > Utility 

   Tester Display
   VIN Synchronization

6. According to the display on the GTS, read the IMEI, ICCID, software version and VIN.
7. Turn the ignition switch off.
8. Turn the ignition switch to ON and wait until only the manual (SOS) switch green indicator turns on.

   HINT: 

   If only the manual (SOS) switch green indicator does not turn on even after 1 minute has elapsed with the ignition switch ON, refer to "GREEN INDICATOR REMAINS OFF".

   Refer to GREEN INDICATOR REMAINS OFF [12/2019 - ]