Data List / Active Test [12/2019 - ]
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Body Electrical / Telematics / Data List.
- According to the display on the GTS, read the "Data List".
Body Electrical > Telematics > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note Total Distance Traveled Total distance traveled Min.: 0, Max.: 16777215 - - Total Distance Traveled - Unit Total distance traveled unit -, km or mile - - IMEI IMEI of telematics transceiver 15 digits - - Software Version High Software version of telematics transceiver (10 leftmost digits) 10 digits - - Software Version Low Software version of telematics transceiver (10 rightmost digits) 10 digits - - MSISDN MSISDN of telematics transceiver 16 digits - - PLMN (MCC) MCC of telematics transceiver 3 digits - - PLMN (MNC) MNC of telematics transceiver 3 digits - - ICCID (High) ICCID of telematics transceiver (10 leftmost digits) 10 digits - - ICCID (Low) ICCID of telematics transceiver (10 rightmost digits) 10 digits - - Communication Status with TSC Communication status with Service Center Incomplete or Complete Complete - Telematics Activation Status DCM activation status Shipping or Active Shipping: Not activated
Active: Activated- Remote Vehicle Tracking Display "Remote Vehicle Tracking" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Brand TOYOTA Brand name No or Yes No: Except TOYOTA Brand
YES: TOYOTA Brand- OTA Reprogramming Display "OTA Reprogramming" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- HELPNET Function Display "Helpnet" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Stolen Vehicle Tracking Display "Stolen Vehicle Tracking" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Helpnet Account Status Display emergency call service account status No Account, With Account or Other - - Automatic Collision Notification Function Display "Automatic Collision Notification" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Manual Emergency Call Function Display "Manual Emergency Call" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Wireless Health Check Function Display "Wireless Health Check" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Stolen Vehicle Tracking Function Display "Stolen Vehicle Tracking" function enabled/disabled status Disable or Enable Disable: Following function disabled
Enable: Following function enabled- Telematics Microphone Volume Adjust Setting of Telematics Microphone Volume Adjust Min.: 1, Max.:11 Displays customize setting of Telematics Microphone Volume Adjust - Telematics Speaker Volume Adjust Setting of Telematics Speaker Volume Adjust Min.: 1, Max.:14 Displays customize setting of Telematics Speaker Volume Adjust - Green Indicator The green indicator light on the emergency call switch panel illumination status Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness - - Red Indicator The red indicator light on the emergency call switch panel illumination status Lighting OFF, Nighttime Brightness-Low, Nighttime Brightness-Middle, Nighttime Brightness-High or Daytime Brightness - - Beep Beep volume Min.: 1, Max.:14 - -
- ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the GTS to the DLC3.
- Turn the ignition switch to ON.
- Turn the GTS on.
- Enter the following menus: Body Electrical / Telematics / Active Test.
- According to the display on the GTS, perform the Active Test.
Body Electrical > Telematics > Active Test
Tester Display Measurement Item Control Range Diagnostic Note Green Indicator Operate Manual (SOS) Switch Green Indicator Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness Operate with ignition switch ON and the vehicle stopped. Red Indicator Operate Manual (SOS) Switch Red Indicator Lighting OFF, Nighttime Brightness - Low, Nighttime Brightness - Middle, Nighttime Brightness - High or Daytime Brightness Operate with ignition switch ON and the vehicle stopped. Beep Beep volume Min.: Vol01, Max.: Vol14 Operate with ignition switch ON and the vehicle stopped.