DTC Check / Clear [12/2019 - 11/2023]

CHECK DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER)
1. Turn the ignition switch off.
2. Connect the GTS to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the GTS on.
5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.
  Chassis > Tire Pressure Monitor > Trouble Codes
6. Read the DTCs.
CHECK DTC (for MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))
1. Turn the ignition switch off.
2. Connect the GTS to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the GTS on.
5. Enter the following menus: Body Electrical / Main Body / Trouble Codes.
  Body Electrical > Main Body > Trouble Codes
6. Read the DTCs.
CLEAR DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER)
HINT:

After repairing the malfunctions, clear the DTCs.
1. Turn the ignition switch off.
2. Connect the GTS to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the GTS on.
5. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.
  Chassis > Tire Pressure Monitor > Clear DTCs
6. Clear the DTCs following the prompts on the GTS screen.
  HINT:
  
  Refer to the GTS operator's Service Information for further details.
CLEAR DTC (for MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))
HINT:

After repairing the malfunctions, clear the DTCs.
1. Turn the ignition switch off.
2. Connect the GTS to the DLC3.
3. Turn the ignition switch to ON.
4. Turn the GTS on.
5. Enter the following menus: Body Electrical / Main Body / Trouble Codes.
  Body Electrical > Main Body > Clear DTCs
6. Clear the DTCs following the prompts on the GTS screen.
  HINT:
  
  Refer to the GTS operator's Service Information for further details.