DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Intuitive Parking Assist System (W/O Parking Support Brake System) - Diagnostics - Introduction >> INTUITIVE PARKING ASSIST SYSTEM (w/o Parking Support Brake System) >> Customize Parameters [12/2019 - 11/2023] >> Customize Parameters [12/2019 - 11/2023]

Customize Parameters [12/2019 - 11/2023]

  1. CUSTOMIZE INTUITIVE PARKING ASSIST SYSTEM 
    1. Customizing with the GTS
      NOTE:
      • When the customer requests a change in a function, first make sure that the function can be customized.
      • Be sure to make a note of the current settings before customizing.
      • When troubleshooting a function, first make sure that the function is set to the default setting.
      1. Connect the GTS to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the intuitive parking assist system on.
      4. Turn the GTS on.
      5. Enter the following menus: Body Electrical / Clearance Warning / Utility / Customize Setting.
      6. Select the setting by referring to the table below.

        Clearance Warning 

        Tester Display Description Default Setting ECU
        Ultrasonic Sensor (Front Center) Detection Range Sets the detection range of the ultrasonic sensor (front center). Far $00:Close, $01:Far Clearance warning ECU assembly
        Ultrasonic Sensor (Front Corner) Detection Range Sets the detection range of the ultrasonic sensor (front corner). Far $00:Close, $01:Far Clearance warning ECU assembly
        Ultrasonic Sensor (Rear Center) Detection Range Sets the detection range of the ultrasonic sensor (rear center). Far $00:Close, $01:Far Clearance warning ECU assembly
        Ultrasonic Sensor (Rear Corner) Detection Range Sets the detection range of the ultrasonic sensor (rear corner). Far $00:Close, $01:Far Clearance warning ECU assembly
        Clearance Warning Buzzer Volume Sets the volume of the clearance warning buzzer. Volume 2 $01:Volume1, $02:Volume2, $03:Volume3 Clearance warning ECU assembly
        PKSA (O) Forward Detection Image Display Sets whether to show the clearance sonar function detection status on the display, when an obstacle is detected while driving the vehicle forward. Display $01:Display, $03:Hide Clearance warning ECU assembly
        Ultrasonic Sensor Actuation (Shift N) Turns ultrasonic sensor operation ON/OFF when shift position is in N. ON $00:OFF, $01:ON Clearance warning ECU assembly
        PKSA (O) Switch State Stored Sets whether to store the clearance sonar function main switch status (ON/OFF). Stored $00:Not Stored, $01:Stored Clearance warning ECU assembly
        PKSA (O) Judgment of Obstacle on Course Sets whether to enable automatic mute in the following situation, among the automatic mute conditions for the clearance sonar function automatic mute function. (Obstacle is not in path of own vehicle.) Valid $00:Valid, $01:Invalid Clearance warning ECU assembly
        PKSA (O) Auto Mute Function Turns the function that mutes the clearance sonar function warning sound ON/OFF, when conditions are met. ON $00:ON, $01:OFF Clearance warning ECU assembly
        PKSA (O) Image Display when Away from the Obstacle Function to display detected objects when the vehicle is moving away from the objects. Display $00:Hide, $01:Display Clearance warning ECU assembly
        Voice Guidance Function Turns the speech guidance function ON/OFF. ON $00:OFF, $01:ON Clearance warning ECU assembly
    2. Customizing with combination meter assembly
      NOTE:
      • When the customer requests a change in a function, first make sure that the function can be customized.
      • Be sure to make a note of the current settings before customizing.
      • When troubleshooting a function, first make sure that the function is set to the default setting.
      1. Turn the ignition switch to ON.
      2. Turn the intuitive parking assist system on.
      3. Enter the following menus: PKSA
      4. Select the setting by referring to the table below.
        INTUITIVE PARKING ASSIST SYSTEM

        Display Description Default Setting ECU
        Buzzer Volume Setting of the No. 1 clearance warning buzzer, No. 2 clearance warning buzzer and rear cross traffic alert buzzer (blind spot monitor buzzer) volume 2 1, 2, or 3 Clearance warning ECU assembly
Diesel-Data.com