Caution / Notice / Hint

NOTE:

The power mirror control system (w/ Memory) uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the power mirror control system (w/ Memory) after confirming that the communication systems are functioning properly.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2019 - 11/2023]
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
for HV Model: Refer to REGISTRATION [12/2019 - 10/2021] , or refer to REGISTRATION [10/2021 - 11/2023]

for Gasoline Model: Refer to REGISTRATION [12/2019 - 10/2021] , or refer to REGISTRATION [10/2021 - 10/2022] , or refer to REGISTRATION [10/2022 - 11/2023]
The mirror surface position will not be memorized if the ignition switch is not ON.
The mirror surface position will not be stored if the seat memory SET switch and 2 or more seat memory switches are pressed simultaneously.
If the operation fails, the mirror surface position will not be memorized until the seat memory SET switch is released and the operation is attempted again.
The mirror surface position will not be memorized when the mirror is operated manually.

HINT:

Each outer rear view mirror assembly has a built-in mirror vertical position sensor and mirror horizontal position sensor.