Caution / Notice / Hint
NOTE:
- The power mirror control system (w/ Memory) uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the power mirror control system (w/ Memory) after confirming that the communication systems are functioning properly.
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
for HV Model: Refer to REGISTRATION [11/2023 - ]
for Gasoline Model: Refer to REGISTRATION [11/2023 - ]
- The mirror surface position will not be memorized if the ignition switch is not ON.
- The mirror surface position will not be stored if the seat memory SET switch and 2 or more seat memory switches are pressed simultaneously.
- If the operation fails, the mirror surface position will not be memorized until the seat memory SET switch is released and the operation is attempted again.
- The mirror surface position will not be memorized when the mirror is operated manually.
HINT:
Each outer rear view mirror assembly has a built-in mirror vertical position sensor and mirror horizontal position sensor.