Hybrid System Indicator Malfunction [11/2023 - ]: Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Check if CAN communication DTCs are output.
Refer to DIAGNOSIS SYSTEM [11/2023 - ]
Result
Result Proceed to DTCs are not output A DTCs are output B
Result:
B
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]
Result:
A
See step 2
- Check if CAN communication DTCs are output.
- CHECK FOR DTC (HYBRID CONTROL SYSTEM)
- Check if hybrid control system DTCs are output.
Powertrain > Hybrid Control > Trouble Codes
Result
Result Proceed to DTCs are not output A DTCs are output B
Result:
B
GO TO HYBRID CONTROL SYSTEM. Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]
Result:
A
See step 3
- Check if hybrid control system DTCs are output.
- PERFORM ACTIVE TEST USING GTS
- Perform the Active Test according to the display on the GTS.
Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note HV/EV System Indicator (MIN) Hybrid system indicator value
(Charge area)ON See [Display 1] HV/EV System Indicator (-50%) Hybrid system indicator value
(Charge area)ON See [Display 1] HV/EV System Indicator (0%) Hybrid system indicator value
(Charge area)ON See [Display 1] HV/EV System Indicator (100%) Hybrid system indicator value
(Eco area)ON See [Display 1] HV/EV System Indicator (200%) Hybrid system indicator value
(Power area)ON See [Display 1] HV/EV System Indicator (300%) Hybrid system indicator value
(Power area)ON See [Display 1] HV/EV System Indicator (400%) Hybrid system indicator value
(Power area)ON See [Display 1] HV/EV System Indicator (MAX) Hybrid system indicator value
(Power area)ON See [Display 1] [Display 1]: HV/EV System Indicator
*a Hybrid System Indicator HINT:
Refer to the following table for the specified hybrid system indicator position for each selected value:
Tester Display Hybrid System Indicator Indication HV/EV System Indicator
(MIN)Approximately 1 is indicated HV/EV System Indicator
(-50%)Approximately 2 is indicated HV/EV System Indicator
(0%)Approximately 3 is indicated HV/EV System Indicator
(100%)Approximately 4 is indicated HV/EV System Indicator
(200%)Approximately 5 is indicated HV/EV System Indicator
(300%)Approximately 6 is indicated HV/EV System Indicator
(400%)Approximately 7 is indicated HV/EV System Indicator
(MAX)Approximately 8 is indicated
Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (MIN) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (-50%) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (0%) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (100%) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (200%) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (300%) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (400%) Body Electrical > Combination Meter > Active Test
Tester Display HV System Indicator (MAX) OK
Hybrid system indicator indication is normal.
Result
Proceed to OK NG
Result:
OK
GO TO HYBRID CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]
Result:
NG
REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL [12/2019 - ]
- Perform the Active Test according to the display on the GTS.
