DTC C14D7-1C: Multi-axis Acceleration Sensor Module "A" Supply Voltage Circuit Voltage Out of Range [12/2019 - 11/2023]: Description
WARNING: This page is about a different variant/trim than selected.
The yaw rate sensor has a built-in acceleration sensor.
This DTC is stored when the No. 2 skid control ECU (brake actuator assembly) receives a sensor supply voltage malfunction signal from the yaw rate sensor.
This DTC may be stored due to an intermittent low power source voltage.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C14D7-1C | Multi-axis Acceleration Sensor Module "A" Supply Voltage Circuit Voltage Out of Range | When the +BS terminal voltage is from 9.5 to 17.4 V at a vehicle speed exceeding 3 km/h (2 mph), an acceleration sensor power source malfunction signal is received for 10 seconds or more. |
|
Comes on |
|