DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 65 (Electronically Controlled Brake System (HV) - Diagnostic Codes (10 Of 11)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C14D7-1C: Multi-axis Acceleration Sensor Module "A" Supply Voltage Circuit Voltage Out of Range [12/2019 - 11/2023] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different variant/trim than selected.
Monitor runs whenever the following DTCs are not stored C1241: Brake system voltage input out of range low
C137D: Brake system voltage input out of range high
U0125: Lost communication with multi-axis acceleration sensor module
All of the following conditions are met -
Communication status with acceleration sensor (yaw rate sensor) Valid
Vehicle speed Higher than 3 km/h (1.86 mph)
IG1 On
+BS voltage 9.5 V or more, and 17.4 V or less
Diesel-Data.com