Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
C13C2 (CASE 1) AND C13CB (CASE 1)
| Solenoid load open/short to ground signal | On |
C13C2 (CASE 2) AND C13CB (CASE 2)
| Either of the following conditions is met | - |
| Solenoid return current terminal disconnection signal | On |
| Solenoid GND terminal disconnection signal | On |
C13C2 (CASE 3) AND C13CB (CASE 3)
| Divide SM solenoid current monitor value by SM solenoid target current value | Less than 0.25 |
C13C3 (CASE 1) AND C13CC (CASE 1)
| SM solenoid current monitor value | Higher than 0.1 A |
C13C3 (CASE 2) AND C13CC (CASE 2)
| Either of the following conditions is met | - |
| Solenoid overcurrent signal | On |
| Solenoid driver overtemperature signal | On |
C13C3 (CASE 3) AND C13CC (CASE 3)
| Solenoid load leakage signal | On |
C13C3 (CASE 4) AND C13CC (CASE 4)
| Either of the following conditions is met | A or B |
| A. Both of the following conditions are met | - |
| Divide SM solenoid current monitor value by SM solenoid target current value | Higher than 2 |
| SM solenoid target current value | 0.348 A or more |
| B. Both of the following conditions are met | - |
| SM solenoid current monitor value | Higher than 0.696 A |
| SM solenoid target current value | Less than 0.348 A |