DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 135 (Electronically Controlled Brake System (HV) - Diagnostic Codes (09 Of 11)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C13C0-12: Brake Pressure Control Solenoid "A" Control Circuit Short to Battery; DTC C13C0-14: Brake Pressure Control Solenoid "A" Control Circuit Short to Ground or Open; DTC C13C0-18: Brake Pressure Control Solenoid "A" Control Circuit Current Below Threshold; DTC C13C0-19: Brake Pressure Control Solenoid "A" Control Circuit Current Above Threshold; DTC C13C0-1D: Brake Pressure Control Solenoid "A" Control Circuit Current Out of Range; DTC C13C9-12: Brake Pressure Control Solenoid "B" Control Circuit Short to Battery; DTC C13C9-14: Brake Pressure Control Solenoid "B" Control Circuit Short to Ground or Open; DTC C13C9-18: Brake Pressure Control Solenoid "B" Control Circuit Current Below Threshold; DTC C13C9-19: Brake Pressure Control Solenoid "B" Control Circuit Current Above Threshold; DTC C13C9-1D: Brake Pressure Control Solenoid "B" Control Circuit Current Out of Range [10/2021 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

The No. 2 skid control ECU (brake actuator assembly) monitors the drive voltage and current of the master cylinder cut solenoid. Based on the monitored information, if any of the following abnormal conditions are detected, the MIL is illuminated and a DTC is stored.

Diesel-Data.com