DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 135 (Electronically Controlled Brake System (HV) - Diagnostic Codes (09 Of 11)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C13DA-09: Brake Pressure Too High (Brake Booster) Component Failure [12/2019 - 11/2023] >> Monitor Strategy

Monitor Strategy

WARNING: This page is about a different variant/trim than selected.
Related DTCs C13DA: Brake pressure control solenoid pressure too high
Required Sensors/Components (Main) No. 2 skid control ECU (brake actuator assembly)
Brake actuator (brake booster with master cylinder assembly)
Required Sensors/Components (Related) Speed sensor
Stop light switch assembly
No. 2 skid control ECU (brake actuator assembly)
Brake actuator (brake booster with master cylinder assembly)
Frequency of Operation Continuous
Duration 0.36 seconds: C13DA (Case 1-2, 1-3 and 1-4)
0.54 seconds: C13DA (Case 1-1)
MIL Operation Immediately
Sequence of Operation None
Diesel-Data.com