Component Operating Range
WARNING: This page is about a different variant/trim than selected.
C12FA (CASE 1 AND 2) AND C12FB (CASE 1)
| Both of the following conditions are met | A and B |
| A. All of the following conditions are met at the ECU status (last IG ON timing final) | - |
| Brake system voltage fail (C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C, C141D, C141E, C141F) | Not detected |
| Brake pressure control solenoid fail (C14F4, C14FD, C150A, C1510) | Not detected |
| B. All of the following conditions are met at the ECU status (pre main) | - |
| Brake system voltage fail (C121F, C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C) | Not detected |
| Brake pressure control solenoid fail (C14F3, C14F4, C14FC, C14FD, C1509, C150A, C150F, C1510) | Not detected |
C12FA (CASE 3)
| All of the following conditions are met | A, B, C and D |
| A. Solenoid relay | On |
| B. Brake system voltage 1 | Higher than 7.3 V |
| C. All of the following conditions are met at the ECU status (last IG ON timing final) | - |
| Brake system voltage fail (C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C, C141D, C141E, C141F) | Not detected |
| Brake pressure control solenoid fail (C14F4, C14FD, C150A, C1510) | Not detected |
| D. All of the following conditions are met at the ECU status (pre main) | - |
| Brake system voltage fail (C121F, C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C) | Not detected |
| Brake pressure control solenoid fail (C14F3, C14F4, C14FC, C14FD, C1509, C150A, C150F, C1510) | Not detected |
C12FB (CASE 2)
| All of the following conditions are met | A, B and C |
| A. Solenoid relay | Off |
| B. All of the following conditions are met at the ECU status (last IG ON timing final) | - |
| Brake system voltage fail (C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C, C141D, C141E, C141F) | Not detected |
| Brake pressure control solenoid fail (C14F4, C14FD, C150A, C1510) | Not detected |
| C. All of the following conditions are met at the ECU status (pre main) | - |
| Brake system voltage fail (C121F, C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C) | Not detected |
| Brake pressure control solenoid fail (C14F3, C14F4, C14FC, C14FD, C1509, C150A, C150F, C1510) | Not detected |