DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Electronically Controlled Brake System (HV) - Diagnostic Codes (08 Of 11)) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> DTC C1345-00: Linear Solenoid Valve Offset Learning [11/2023 - ] >> Description

DTC C1345-00: Linear Solenoid Valve Offset Learning [11/2023 - ]: Description

WARNING: This page is about a different variant/trim than selected.

The No. 1 skid control ECU (brake booster with master cylinder assembly) stores the individual characteristics of each linear solenoid built into the brake booster with master cylinder assembly. Based on the stored information, the No. 1 skid control ECU (brake booster with master cylinder assembly) calibrates the individual differences and controls systems.

The No. 2 skid control ECU (brake actuator assembly) receives the shift position P signal from the hybrid vehicle control ECU via the CAN communication system.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
C1345-00 Linear Solenoid Valve Offset Learning When the vehicle speed is 40 km/h (25 mph) or more, the linear solenoid valve offset learning value is not stored.
  • Perform linear solenoid valve offset learning and check for DTCs. If no DTCs are output again, the valve is normal.
  • No. 1 skid control ECU (brake booster with master cylinder assembly)
Comes on
  • SAE Code: C1345
  • Output ECU: No. 2 skid control ECU (brake actuator assembly)
HINT: During Dealer Mode, related DTCs are cleared (except SAE code).