Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".
Refer to UTILITY [12/2019 - 11/2023]
HINT:
When DTC P0571-12 and/or P0571-13 are output together with DTC C1380-7E, inspect and repair the trouble areas indicated by DTC P0571-12 and/or P0571-13 first.
for P0571-12: Refer to DTC P0571-12: Brake Switch "A" Circuit Short to Battery [12/2019 - 11/2023]
for P0571-13: Refer to DTC P0571-13: Brake Switch "A" Circuit Open [12/2019 - ]