DTC C1380-7F: Stop Lamp Relay Actuator Stuck Off [11/2023 - ]: Description

WARNING: This page is about a different variant/trim than selected.

Refer to DTC C1380-7E.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
C1380-7F	Stop Lamp Relay Actuator Stuck Off	Either of the following is detected: When the IG1 terminal voltage exceeds 10 V and the +BS terminal voltage is from 9.5 to 17.4 V, stop light drive output (STPO) is ON, STP is OFF and STP2 is OFF continuously for 2 seconds or more. When the IG1 terminal voltage exceeds 10 V and the +BS terminal voltage is from 9.5 to 17.4 V, STP is OFF and STP2 is ON continuously for 5 seconds or more.	Wire harness and connector Stop light switch assembly STP circuit STP2 circuit No. 2 skid control ECU (brake actuator assembly)	Does not come on	Output ECU: No. 2 skid control ECU (brake actuator assembly)