Caution / Notice / Hint
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".
Refer to UTILITY [11/2023 - ]
HINT:
When DTC P0571-13 is output together with DTC C1380-7F, inspect and repair the trouble areas indicated by DTC P0571-13 first.
Refer to DTC P0571-13: Brake Switch "A" Circuit Open [12/2019 - ]