DTC C13B9-51: SM Valve Learning Not Programmed; DTC C13B9-54: SM Valve Learning Missing Calibration [12/2019 - ]: Description

WARNING: This page is about a different variant/trim than selected.

The No. 2 skid control ECU (brake actuator assembly) stores the individual characteristics of each linear solenoid built into the brake actuator assembly. Based on the stored information, the No. 2 skid control ECU (brake actuator assembly) calibrates the individual differences and controls systems.

The No. 2 skid control ECU (brake actuator assembly) receives the shift position P signal from the hybrid vehicle control ECU through the CAN communication system.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
C13B9-51	SM Valve Learning Not Programmed	The SM solenoid valve offset learning value is not stored.	If this DTC is not output after performing SM solenoid valve offset learning, there is no malfunction. Brake fluid leaks No. 2 skid control ECU (brake actuator assembly)	Does not come on	Output ECU: No. 2 skid control ECU (brake actuator assembly) HINT: During Dealer Mode, related DTCs are cleared.
C13B9-54	SM Valve Learning Missing Calibration	SM solenoid valve offset learning cannot be obtained	If this DTC is not output after performing SM solenoid valve offset learning, there is no malfunction. Brake fluid leaks No. 2 skid control ECU (brake actuator assembly)	Does not come on	Output ECU: No. 2 skid control ECU (brake actuator assembly)