DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information >> Blind Spot Monitor Sensor >> Removal [11/2023 - ] >> Procedure

Removal [11/2023 - ]: Procedure

  1. BSM ECU DATA SAVE 

    See step  1

  2. REMOVE REAR BUMPER ASSEMBLY 

    Refer to REMOVAL [11/2023 - ]

  3. REMOVE BLIND SPOT MONITOR SENSOR LH 
    1. Disconnect the connector.
      GTY928059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 nuts and blind spot monitor sensor LH.
      NOTE:

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

  4. REMOVE BLIND SPOT MONITOR SENSOR RH 
    1. Disconnect the connector.
      GTY846687Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 nuts and blind spot monitor sensor RH.
      NOTE:

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.

Diesel-Data.com