DSD Information System
Home >> Toyota >> 2021 >> Highlander LE, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information >> Blind Spot Monitor Sensor >> Installation [12/2019 - 11/2023] >> Procedure

Installation [12/2019 - 11/2023]: Procedure

  1. INSTALL BLIND SPOT MONITOR SENSOR LH 
    1. Connect the connector.
    2. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  2. INSTALL BLIND SPOT MONITOR SENSOR RH 
    1. Connect the connector.
    2. Install the blind spot monitor sensor RH with the 3 nuts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  3. PERFORM BLIND SPOT MONITOR SENSOR INSTALLATION CONDITION INSPECTION 

    See step  2 [12/2019 - 10/2022], or see step  2 [10/2022 - 11/2023]

  4. INSTALL REAR BUMPER ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 09/2020] , or refer to INSTALLATION [09/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - ]

  5. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION 

    See step  1 [12/2019 - 10/2022], or see step  1 [10/2022 - 11/2023]

  6. PERFORM DIAGNOSTIC SYSTEM CHECK 

    Refer to DTC CHECK / CLEAR [12/2019 - 11/2023]

Diesel-Data.com