Component Operating Range
WARNING: This page is about a different variant/trim than selected.
C110F (CASE 1)
| All of the following conditions are met | A, B, C and D |
| A. Brake system voltage 1 | Higher than 7.3 V |
| B. MRI1 voltage | 5.7 V or more |
| C. All of the following conditions are met at the ECU status (last IG ON timing final) | - |
| Brake system voltage fail (C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C, C141D, C141E, C141F) | Not detected |
| Brake pressure control solenoid fail (C14F4, C14FD, C150A, C1510) | Not detected |
| D. All of the following conditions are met at the ECU status (pre main) | - |
| Brake system voltage fail (C121F, C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C) | Not detected |
| Brake pressure control solenoid fail (C14F3, C14F4, C14FC, C14FD, C1509, C150A, C150F, C1510) | Not detected |
C110F (CASE 2)
| All of the following conditions are met | A, B, C, D, E, F and G |
| A. Brake system voltage 1 | Higher than 7.3 V |
| B. Motor relay input signal permission | Off |
| C. Command to motor relay | Off |
| D. Motor duty output order value | 0% |
| E. MRI1 voltage | 5.7 V or more |
| F. All of the following conditions are met at the ECU status (last IG ON timing final) | - |
| Brake system voltage fail (C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C, C141D, C141E, C141F) | Not detected |
| Brake pressure control solenoid fail (C14F4, C14FD, C150A, C1510) | Not detected |
| G. All of the following conditions are met at the ECU status (pre main) | - |
| Brake system voltage fail (C121F, C12FA, C12FB) | Not detected |
| Brake booster motor fail (C141C) | Not detected |
| Brake pressure control solenoid fail (C14F3, C14F4, C14FC, C14FD, C1509, C150A, C150F, C1510) | Not detected |