Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
| Monitor runs whenever the following DTCs are not stored | C0540 (Case 1): Pressure sensor verify communication C0540 (Case 2 to 4): Pressure sensor range check C056B: Pressure sensor intermittent/erratic C1103 (Case 1): Brake pedal position sensor voltage circuit/open C1103 (Case 2): Brake pedal position sensor invalid data C122E: Pressure sensor input out of range low C122F: Pressure sensor input out of range high P057A: Brake pedal position sensor invalid data P05DB: Brake pedal position sensor invalid data P05DD: Brake pedal position sensor open circuit P05DE: Brake pedal position sensor circuit high P05DF: Brake pedal position sensor intermittent/erratic P05E0: Brake pedal position sensor "A"/"B" correlation |
| All of the following conditions are met | A and B |
| A. Pressure sensor fail (C0540, C122F, C056B) | Not detected |
| B. Either of the following conditions is met | a or b |
| a. Both of the following conditions are met | - |
| Up / downstream communication | Valid |
| Zero point error permission | On |
| b. All of the following conditions are met | - |
| Up / downstream communication | Valid |
| Brake position sensor circuit effective invalidity | Valid |
| Brake actuator operation | Off |